1967 Austin 3-Litre vs. 1991 Italdesign Nazca
To start off, 1991 Italdesign Nazca is newer by 24 year(s). Which means there will be less support and parts availability for 1967 Austin 3-Litre. In addition, the cost of maintenance, including insurance, on 1967 Austin 3-Litre would be higher. At 4,988 cc (12 cylinders), 1991 Italdesign Nazca is equipped with a bigger engine. In terms of performance, 1991 Italdesign Nazca (350 HP @ 5200 RPM) has 230 more horse power than 1967 Austin 3-Litre. (120 HP @ 4750 RPM) In normal driving conditions, 1991 Italdesign Nazca should accelerate faster than 1967 Austin 3-Litre.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Italdesign Nazca (470 Nm @ 4000 RPM) has 249 more torque (in Nm) than 1967 Austin 3-Litre. (221 Nm @ 2700 RPM). This means 1991 Italdesign Nazca will have an easier job in driving up hills or pulling heavy equipment than 1967 Austin 3-Litre.
Compare all specifications:
1967 Austin 3-Litre | 1991 Italdesign Nazca | |
Make | Austin | Italdesign |
Model | 3-Litre | Nazca |
Year Released | 1967 | 1991 |
Engine Position | Front | Middle |
Engine Size | 2910 cc | 4988 cc |
Engine Cylinders | 6 cylinders | 12 cylinders |
Engine Type | in-line | V |
Horse Power | 120 HP | 350 HP |
Engine RPM | 4750 RPM | 5200 RPM |
Torque | 221 Nm | 470 Nm |
Torque RPM | 2700 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Top Speed | 161 km/hour | 297 km/hour |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Length | 4720 mm | 4400 mm |
Vehicle Width | 1700 mm | 2090 mm |
Vehicle Height | 1450 mm | 1120 mm |
Wheelbase Size | 2940 mm | 2600 mm |