1967 Austin-Healey 3000 Mk III vs. 1992 Cadillac Seville
To start off, 1992 Cadillac Seville is newer by 25 year(s). Which means there will be less support and parts availability for 1967 Austin-Healey 3000 Mk III. In addition, the cost of maintenance, including insurance, on 1967 Austin-Healey 3000 Mk III would be higher. At 4,915 cc (8 cylinders), 1992 Cadillac Seville is equipped with a bigger engine. In terms of performance, 1992 Cadillac Seville (197 HP @ 4100 RPM) has 51 more horse power than 1967 Austin-Healey 3000 Mk III. (146 HP @ 5250 RPM) In normal driving conditions, 1992 Cadillac Seville should accelerate faster than 1967 Austin-Healey 3000 Mk III. With that said, vehicle weight also plays an important factor in acceleration. 1992 Cadillac Seville weights approximately 416 kg more than 1967 Austin-Healey 3000 Mk III. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1967 Austin-Healey 3000 Mk III is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Austin-Healey 3000 Mk III. However, in wet, icy, snow, or gravel driving conditions, 1992 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Cadillac Seville (372 Nm @ 3000 RPM) has 207 more torque (in Nm) than 1967 Austin-Healey 3000 Mk III. (165 Nm @ 3500 RPM). This means 1992 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1967 Austin-Healey 3000 Mk III. 1992 Cadillac Seville has automatic transmission and 1967 Austin-Healey 3000 Mk III has manual transmission. 1967 Austin-Healey 3000 Mk III will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1967 Austin-Healey 3000 Mk III | 1992 Cadillac Seville | |
| Make | Austin-Healey | Cadillac |
| Model | 3000 Mk III | Seville |
| Year Released | 1967 | 1992 |
| Engine Position | Front | Front |
| Engine Size | 2912 cc | 4915 cc |
| Engine Cylinders | 6 cylinders | 8 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 146 HP | 197 HP |
| Engine RPM | 5250 RPM | 4100 RPM |
| Torque | 165 Nm | 372 Nm |
| Torque RPM | 3500 RPM | 3000 RPM |
| Engine Bore Size | 83.4 mm | 92 mm |
| Engine Stroke Size | 88.9 mm | 92 mm |
| Engine Compression Ratio | 8.8:1 | 9.5:1 |
| Fuel Type | Gasoline | Gasoline |
| Top Speed | 195 km/hour | 193 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1180 kg | 1596 kg |
| Vehicle Length | 4010 mm | 5320 mm |
| Vehicle Width | 1530 mm | 1890 mm |
| Vehicle Height | 1250 mm | 1380 mm |
| Wheelbase Size | 2340 mm | 2860 mm |
| Fuel Tank Capacity | 54 L | 100 L |
