1967 Austin-Healey 3000 Mk III vs. 1998 Buick Signia
To start off, 1998 Buick Signia is newer by 31 year(s). Which means there will be less support and parts availability for 1967 Austin-Healey 3000 Mk III. In addition, the cost of maintenance, including insurance, on 1967 Austin-Healey 3000 Mk III would be higher. At 3,800 cc (6 cylinders), 1998 Buick Signia is equipped with a bigger engine. In terms of performance, 1998 Buick Signia (238 HP @ 5200 RPM) has 92 more horse power than 1967 Austin-Healey 3000 Mk III. (146 HP @ 5250 RPM) In normal driving conditions, 1998 Buick Signia should accelerate faster than 1967 Austin-Healey 3000 Mk III. With that said, vehicle weight also plays an important factor in acceleration. 1998 Buick Signia weights approximately 560 kg more than 1967 Austin-Healey 3000 Mk III. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1967 Austin-Healey 3000 Mk III is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Austin-Healey 3000 Mk III. However, in wet, icy, snow, or gravel driving conditions, 1998 Buick Signia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Buick Signia (387 Nm @ 3600 RPM) has 222 more torque (in Nm) than 1967 Austin-Healey 3000 Mk III. (165 Nm @ 3500 RPM). This means 1998 Buick Signia will have an easier job in driving up hills or pulling heavy equipment than 1967 Austin-Healey 3000 Mk III. 1998 Buick Signia has automatic transmission and 1967 Austin-Healey 3000 Mk III has manual transmission. 1967 Austin-Healey 3000 Mk III will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Buick Signia will be easier to drive especially in heavy traffic.
Compare all specifications:
1967 Austin-Healey 3000 Mk III | 1998 Buick Signia | |
Make | Austin-Healey | Buick |
Model | 3000 Mk III | Signia |
Year Released | 1967 | 1998 |
Engine Position | Front | Front |
Engine Size | 2912 cc | 3800 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 146 HP | 238 HP |
Engine RPM | 5250 RPM | 5200 RPM |
Torque | 165 Nm | 387 Nm |
Torque RPM | 3500 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1180 kg | 1740 kg |
Vehicle Length | 4010 mm | 4710 mm |
Vehicle Width | 1530 mm | 1890 mm |
Vehicle Height | 1250 mm | 1550 mm |
Wheelbase Size | 2340 mm | 2860 mm |