1967 Austin-Healey 3000 Mk III vs. 2006 Fiat Panda
To start off, 2006 Fiat Panda is newer by 39 year(s). Which means there will be less support and parts availability for 1967 Austin-Healey 3000 Mk III. In addition, the cost of maintenance, including insurance, on 1967 Austin-Healey 3000 Mk III would be higher. At 2,912 cc (6 cylinders), 1967 Austin-Healey 3000 Mk III is equipped with a bigger engine. In terms of performance, 1967 Austin-Healey 3000 Mk III (146 HP @ 5250 RPM) has 76 more horse power than 2006 Fiat Panda. (70 HP @ 4000 RPM). In normal driving conditions, 1967 Austin-Healey 3000 Mk III should accelerate faster than 2006 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1967 Austin-Healey 3000 Mk III weights approximately 245 kg more than 2006 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 Fiat Panda is four wheel drive (4WD), it will have significant more traction and grip than 1967 Austin-Healey 3000 Mk III. In wet, icy, snow, or gravel driving conditions, 2006 Fiat Panda will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Fiat Panda (197 Nm @ 1500 RPM) has 32 more torque (in Nm) than 1967 Austin-Healey 3000 Mk III. (165 Nm @ 3500 RPM). This means 2006 Fiat Panda will have an easier job in driving up hills or pulling heavy equipment than 1967 Austin-Healey 3000 Mk III. 2006 Fiat Panda has automatic transmission and 1967 Austin-Healey 3000 Mk III has manual transmission. 1967 Austin-Healey 3000 Mk III will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Fiat Panda will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1967 Austin-Healey 3000 Mk III | 2006 Fiat Panda | |
| Make | Austin-Healey | Fiat |
| Model | 3000 Mk III | Panda |
| Year Released | 1967 | 2006 |
| Engine Position | Front | Front |
| Engine Size | 2912 cc | 1297 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 146 HP | 70 HP |
| Engine RPM | 5250 RPM | 4000 RPM |
| Torque | 165 Nm | 197 Nm |
| Torque RPM | 3500 RPM | 1500 RPM |
| Engine Bore Size | 83.4 mm | 69.6 mm |
| Engine Stroke Size | 88.9 mm | 82 mm |
| Fuel Type | Gasoline | Diesel |
| Top Speed | 195 km/hour | 150 km/hour |
| Drive Type | Rear | 4WD |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1180 kg | 935 kg |
| Vehicle Length | 4010 mm | 3540 mm |
| Vehicle Width | 1530 mm | 1600 mm |
| Vehicle Height | 1250 mm | 1550 mm |
| Wheelbase Size | 2340 mm | 2310 mm |
| Fuel Tank Capacity | 54 L | 35 L |
