1967 Austin-Healey 3000 Mk III vs. 2008 Mitsubishi Outlander
To start off, 2008 Mitsubishi Outlander is newer by 41 year(s). Which means there will be less support and parts availability for 1967 Austin-Healey 3000 Mk III. In addition, the cost of maintenance, including insurance, on 1967 Austin-Healey 3000 Mk III would be higher. At 2,998 cc (6 cylinders), 2008 Mitsubishi Outlander is equipped with a bigger engine. In terms of performance, 2008 Mitsubishi Outlander (220 HP @ 6250 RPM) has 74 more horse power than 1967 Austin-Healey 3000 Mk III. (146 HP @ 5250 RPM) In normal driving conditions, 2008 Mitsubishi Outlander should accelerate faster than 1967 Austin-Healey 3000 Mk III. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mitsubishi Outlander weights approximately 290 kg more than 1967 Austin-Healey 3000 Mk III. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Mitsubishi Outlander is four wheel drive (4WD), it will have significant more traction and grip than 1967 Austin-Healey 3000 Mk III. In wet, icy, snow, or gravel driving conditions, 2008 Mitsubishi Outlander will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mitsubishi Outlander (277 Nm @ 4000 RPM) has 112 more torque (in Nm) than 1967 Austin-Healey 3000 Mk III. (165 Nm @ 3500 RPM). This means 2008 Mitsubishi Outlander will have an easier job in driving up hills or pulling heavy equipment than 1967 Austin-Healey 3000 Mk III. 2008 Mitsubishi Outlander has automatic transmission and 1967 Austin-Healey 3000 Mk III has manual transmission. 1967 Austin-Healey 3000 Mk III will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mitsubishi Outlander will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1967 Austin-Healey 3000 Mk III | 2008 Mitsubishi Outlander | |
| Make | Austin-Healey | Mitsubishi |
| Model | 3000 Mk III | Outlander |
| Year Released | 1967 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2912 cc | 2998 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 146 HP | 220 HP |
| Engine RPM | 5250 RPM | 6250 RPM |
| Torque | 165 Nm | 277 Nm |
| Torque RPM | 3500 RPM | 4000 RPM |
| Engine Compression Ratio | 8.8:1 | 9.5:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | 4WD |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1180 kg | 1470 kg |
| Vehicle Length | 4010 mm | 4650 mm |
| Vehicle Width | 1530 mm | 1810 mm |
| Vehicle Height | 1250 mm | 1730 mm |
| Wheelbase Size | 2340 mm | 2680 mm |
| Fuel Tank Capacity | 54 L | 60 L |
