1967 Autobianchi Bianchina vs. 1950 Holden FX

To start off, 1967 Autobianchi Bianchina is newer by 17 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,165 cc (6 cylinders), 1950 Holden FX is equipped with a bigger engine. In terms of performance, 1950 Holden FX (51 HP) has 33 more horse power than 1967 Autobianchi Bianchina. (18 HP) In normal driving conditions, 1950 Holden FX should accelerate faster than 1967 Autobianchi Bianchina. With that said, vehicle weight also plays an important factor in acceleration. 1950 Holden FX weights approximately 385 kg more than 1967 Autobianchi Bianchina. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Holden FX (136 Nm @ 2000 RPM) has 106 more torque (in Nm) than 1967 Autobianchi Bianchina. (30 Nm @ 2800 RPM). This means 1950 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 1967 Autobianchi Bianchina.

Compare all specifications:

1967 Autobianchi Bianchina 1950 Holden FX
Make Autobianchi Holden
Model Bianchina FX
Year Released 1967 1950
Engine Position Rear Front
Engine Size 499 cc 2165 cc
Engine Cylinders 2 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 18 HP 51 HP
Torque 30 Nm 136 Nm
Torque RPM 2800 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 585 kg 970 kg
Vehicle Length 3230 mm 4380 mm
Vehicle Width 1350 mm 1710 mm
Vehicle Height 1340 mm 1580 mm
Wheelbase Size 1950 mm 2620 mm