1967 Bizzarrini A3C vs. 2008 Mazda 6

To start off, 2008 Mazda 6 is newer by 41 year(s). Which means there will be less support and parts availability for 1967 Bizzarrini A3C. In addition, the cost of maintenance, including insurance, on 1967 Bizzarrini A3C would be higher. At 5,354 cc (8 cylinders), 1967 Bizzarrini A3C is equipped with a bigger engine. In terms of performance, 1967 Bizzarrini A3C (361 HP @ 5800 RPM) has 149 more horse power than 2008 Mazda 6. (212 HP @ 6000 RPM). In normal driving conditions, 1967 Bizzarrini A3C should accelerate faster than 2008 Mazda 6. With that said, vehicle weight also plays an important factor in acceleration. 1967 Bizzarrini A3C weights approximately 80 kg more than 2008 Mazda 6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1967 Bizzarrini A3C is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Bizzarrini A3C. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 Bizzarrini A3C (510 Nm @ 3500 RPM) has 243 more torque (in Nm) than 2008 Mazda 6. (267 Nm @ 5000 RPM). This means 1967 Bizzarrini A3C will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 6. 2008 Mazda 6 has automatic transmission and 1967 Bizzarrini A3C has manual transmission. 1967 Bizzarrini A3C will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mazda 6 will be easier to drive especially in heavy traffic.

Compare all specifications: