1967 Chevrolet Impala vs. 2005 Ford Bantam
To start off, 2005 Ford Bantam is newer by 38 year(s). Which means there will be less support and parts availability for 1967 Chevrolet Impala. In addition, the cost of maintenance, including insurance, on 1967 Chevrolet Impala would be higher. At 6,490 cc (8 cylinders), 1967 Chevrolet Impala is equipped with a bigger engine. In terms of performance, 1967 Chevrolet Impala (325 HP @ 4800 RPM) has 231 more horse power than 2005 Ford Bantam. (94 HP @ 5500 RPM). In normal driving conditions, 1967 Chevrolet Impala should accelerate faster than 2005 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1967 Chevrolet Impala weights approximately 933 kg more than 2005 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1967 Chevrolet Impala is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Chevrolet Impala. However, in wet, icy, snow, or gravel driving conditions, 2005 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 Chevrolet Impala (556 Nm @ 3200 RPM) has 419 more torque (in Nm) than 2005 Ford Bantam. (137 Nm @ 2500 RPM). This means 1967 Chevrolet Impala will have an easier job in driving up hills or pulling heavy equipment than 2005 Ford Bantam. 1967 Chevrolet Impala has automatic transmission and 2005 Ford Bantam has manual transmission. 2005 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1967 Chevrolet Impala will be easier to drive especially in heavy traffic.
Compare all specifications:
1967 Chevrolet Impala | 2005 Ford Bantam | |
Make | Chevrolet | Ford |
Model | Impala | Bantam |
Year Released | 1967 | 2005 |
Engine Position | Front | Front |
Engine Size | 6490 cc | 1597 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 325 HP | 94 HP |
Engine RPM | 4800 RPM | 5500 RPM |
Torque | 556 Nm | 137 Nm |
Torque RPM | 3200 RPM | 2500 RPM |
Engine Bore Size | 104 mm | 82 mm |
Engine Stroke Size | 95.5 mm | 75.5 mm |
Engine Compression Ratio | 10.3:1 | 9.5:1 |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1969 kg | 1036 kg |
Wheelbase Size | 3030 mm | 2620 mm |
Fuel Tank Capacity | 90 L | 54 L |