1967 Ferrari 365 GT vs. 2000 Ford Contour
To start off, 2000 Ford Contour is newer by 33 year(s). Which means there will be less support and parts availability for 1967 Ferrari 365 GT. In addition, the cost of maintenance, including insurance, on 1967 Ferrari 365 GT would be higher. At 4,390 cc (12 cylinders), 1967 Ferrari 365 GT is equipped with a bigger engine. In terms of performance, 1967 Ferrari 365 GT (317 HP @ 6600 RPM) has 189 more horse power than 2000 Ford Contour. (128 HP @ 5500 RPM). In normal driving conditions, 1967 Ferrari 365 GT should accelerate faster than 2000 Ford Contour. With that said, vehicle weight also plays an important factor in acceleration. 1967 Ferrari 365 GT weights approximately 362 kg more than 2000 Ford Contour. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1967 Ferrari 365 GT is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Ferrari 365 GT. However, in wet, icy, snow, or gravel driving conditions, 2000 Ford Contour, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 Ferrari 365 GT (363 Nm @ 5000 RPM) has 183 more torque (in Nm) than 2000 Ford Contour. (180 Nm @ 4000 RPM). This means 1967 Ferrari 365 GT will have an easier job in driving up hills or pulling heavy equipment than 2000 Ford Contour. 2000 Ford Contour has automatic transmission and 1967 Ferrari 365 GT has manual transmission. 1967 Ferrari 365 GT will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Ford Contour will be easier to drive especially in heavy traffic.
Compare all specifications:
1967 Ferrari 365 GT | 2000 Ford Contour | |
Make | Ferrari | Ford |
Model | 365 GT | Contour |
Year Released | 1967 | 2000 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 4390 cc | 1989 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 317 HP | 128 HP |
Engine RPM | 6600 RPM | 5500 RPM |
Torque | 363 Nm | 180 Nm |
Torque RPM | 5000 RPM | 4000 RPM |
Engine Bore Size | 81 mm | 84.8 mm |
Engine Stroke Size | 71 mm | 88 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1610 kg | 1248 kg |
Vehicle Length | 4960 mm | 4680 mm |
Vehicle Width | 1780 mm | 1760 mm |
Vehicle Height | 1350 mm | 1380 mm |
Wheelbase Size | 2660 mm | 2710 mm |