1967 Fiat 600 vs. 1953 Holden FX
To start off, 1967 Fiat 600 is newer by 14 year(s). Which means there will be less support and parts availability for 1953 Holden FX. In addition, the cost of maintenance, including insurance, on 1953 Holden FX would be higher. At 2,166 cc (6 cylinders), 1953 Holden FX is equipped with a bigger engine. In terms of performance, 1953 Holden FX (51 HP) has 28 more horse power than 1967 Fiat 600. (23 HP) In normal driving conditions, 1953 Holden FX should accelerate faster than 1967 Fiat 600. With that said, vehicle weight also plays an important factor in acceleration. 1953 Holden FX weights approximately 140 kg more than 1967 Fiat 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Holden FX (136 Nm @ 2000 RPM) has 91 more torque (in Nm) than 1967 Fiat 600. (45 Nm @ 2400 RPM). This means 1953 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 1967 Fiat 600.
Compare all specifications:
1967 Fiat 600 | 1953 Holden FX | |
Make | Fiat | Holden |
Model | 600 | FX |
Year Released | 1967 | 1953 |
Engine Position | Rear | Front |
Engine Size | 767 cc | 2166 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 23 HP | 51 HP |
Torque | 45 Nm | 136 Nm |
Torque RPM | 2400 RPM | 2000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 830 kg | 970 kg |
Vehicle Length | 3540 mm | 4380 mm |
Vehicle Width | 1450 mm | 1710 mm |
Vehicle Height | 1590 mm | 1580 mm |
Wheelbase Size | 2010 mm | 2620 mm |