1967 Holden HR vs. 1958 Tatra T603
To start off, 1967 Holden HR is newer by 9 year(s). Which means there will be less support and parts availability for 1958 Tatra T603. In addition, the cost of maintenance, including insurance, on 1958 Tatra T603 would be higher. At 3,048 cc (6 cylinders), 1967 Holden HR is equipped with a bigger engine. In terms of performance, 1967 Holden HR (108 HP @ 4200 RPM) has 14 more horse power than 1958 Tatra T603. (94 HP @ 5000 RPM). In normal driving conditions, 1967 Holden HR should accelerate faster than 1958 Tatra T603. With that said, vehicle weight also plays an important factor in acceleration. 1958 Tatra T603 weights approximately 180 kg more than 1967 Holden HR.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 Holden HR (245 Nm @ 1600 RPM) has 87 more torque (in Nm) than 1958 Tatra T603. (158 Nm @ 3000 RPM). This means 1967 Holden HR will have an easier job in driving up hills or pulling heavy equipment than 1958 Tatra T603.
Compare all specifications:
1967 Holden HR | 1958 Tatra T603 | |
Make | Holden | Tatra |
Model | HR | T603 |
Year Released | 1967 | 1958 |
Engine Position | Front | Rear |
Engine Size | 3048 cc | 2545 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 108 HP | 94 HP |
Engine RPM | 4200 RPM | 5000 RPM |
Torque | 245 Nm | 158 Nm |
Torque RPM | 1600 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Vehicle Weight | 1290 kg | 1470 kg |
Vehicle Length | 4610 mm | 5070 mm |
Vehicle Width | 1790 mm | 1920 mm |
Vehicle Height | 1490 mm | 1540 mm |
Wheelbase Size | 2700 mm | 2760 mm |