1967 Innocenti IM 3 vs. 2005 Nissan Hardbody

To start off, 2005 Nissan Hardbody is newer by 38 year(s). Which means there will be less support and parts availability for 1967 Innocenti IM 3. In addition, the cost of maintenance, including insurance, on 1967 Innocenti IM 3 would be higher. At 3,275 cc (6 cylinders), 2005 Nissan Hardbody is equipped with a bigger engine. In terms of performance, 2005 Nissan Hardbody (168 HP @ 4800 RPM) has 112 more horse power than 1967 Innocenti IM 3. (56 HP @ 5500 RPM) In normal driving conditions, 2005 Nissan Hardbody should accelerate faster than 1967 Innocenti IM 3. With that said, vehicle weight also plays an important factor in acceleration. 2005 Nissan Hardbody weights approximately 937 kg more than 1967 Innocenti IM 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2005 Nissan Hardbody is four wheel drive (4WD), it will have significant more traction and grip than 1967 Innocenti IM 3. In wet, icy, snow, or gravel driving conditions, 2005 Nissan Hardbody will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Nissan Hardbody (278 Nm @ 3600 RPM) has 194 more torque (in Nm) than 1967 Innocenti IM 3. (84 Nm @ 2500 RPM). This means 2005 Nissan Hardbody will have an easier job in driving up hills or pulling heavy equipment than 1967 Innocenti IM 3. 2005 Nissan Hardbody has automatic transmission and 1967 Innocenti IM 3 has manual transmission. 1967 Innocenti IM 3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Nissan Hardbody will be easier to drive especially in heavy traffic.

Compare all specifications:

1967 Innocenti IM 3 2005 Nissan Hardbody
Make Innocenti Nissan
Model IM 3 Hardbody
Year Released 1967 2005
Engine Position Front Front
Engine Size 1098 cc 3275 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 56 HP 168 HP
Engine RPM 5500 RPM 4800 RPM
Torque 84 Nm 278 Nm
Torque RPM 2500 RPM 3600 RPM
Engine Bore Size 64.6 mm 91.5 mm
Engine Stroke Size 83.7 mm 83 mm
Engine Compression Ratio 9.0:1 8.9:1
Drive Type Front 4WD
Transmission Type Manual Automatic
Vehicle Weight 894 kg 1831 kg
Wheelbase Size 2380 mm 2960 mm
Fuel Tank Capacity 40 L 84 L