1967 Jensen FF vs. 1968 Morris Oxford
To start off, 1968 Morris Oxford is newer by 1 year(s). Which means there will be less support and parts availability for 1967 Jensen FF. In addition, the cost of maintenance, including insurance, on 1967 Jensen FF would be higher. At 6,276 cc (8 cylinders), 1967 Jensen FF is equipped with a bigger engine. In terms of performance, 1967 Jensen FF (279 HP) has 219 more horse power than 1968 Morris Oxford. (60 HP). In normal driving conditions, 1967 Jensen FF should accelerate faster than 1968 Morris Oxford. With that said, vehicle weight also plays an important factor in acceleration. 1967 Jensen FF weights approximately 841 kg more than 1968 Morris Oxford. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1967 Jensen FF (587 Nm @ 2800 RPM) has 465 more torque (in Nm) than 1968 Morris Oxford. (122 Nm @ 2500 RPM). This means 1967 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 1968 Morris Oxford.
Compare all specifications:
1967 Jensen FF | 1968 Morris Oxford | |
Make | Jensen | Morris |
Model | FF | Oxford |
Year Released | 1967 | 1968 |
Engine Position | Front | Front |
Engine Size | 6276 cc | 1622 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 279 HP | 60 HP |
Torque | 587 Nm | 122 Nm |
Torque RPM | 2800 RPM | 2500 RPM |
Engine Bore Size | 108 mm | 76.2 mm |
Engine Stroke Size | 85.9 mm | 88.9 mm |
Engine Compression Ratio | 10.0:1 | 8.3:1 |
Fuel Type | Gasoline | Gasoline |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1975 kg | 1134 kg |
Vehicle Length | 4860 mm | 4430 mm |
Vehicle Width | 1760 mm | 1620 mm |
Vehicle Height | 1360 mm | 1530 mm |
Wheelbase Size | 2780 mm | 2530 mm |
Fuel Tank Capacity | 72 L | 45 L |