1967 Jensen FF vs. 2007 Toyota Sequoia
To start off, 2007 Toyota Sequoia is newer by 40 year(s). Which means there will be less support and parts availability for 1967 Jensen FF. In addition, the cost of maintenance, including insurance, on 1967 Jensen FF would be higher. At 6,276 cc (8 cylinders), 1967 Jensen FF is equipped with a bigger engine. In terms of performance, 1967 Jensen FF (279 HP @ 4600 RPM) has 6 more horse power than 2007 Toyota Sequoia. (273 HP @ 5400 RPM). In normal driving conditions, 1967 Jensen FF should accelerate faster than 2007 Toyota Sequoia. With that said, vehicle weight also plays an important factor in acceleration. 1967 Jensen FF weights approximately 619 kg more than 2007 Toyota Sequoia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1967 Jensen FF (587 Nm @ 2800 RPM) has 161 more torque (in Nm) than 2007 Toyota Sequoia. (426 Nm @ 3400 RPM). This means 1967 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 2007 Toyota Sequoia.
Compare all specifications:
| 1967 Jensen FF | 2007 Toyota Sequoia | |
| Make | Jensen | Toyota |
| Model | FF | Sequoia |
| Year Released | 1967 | 2007 |
| Engine Position | Front | Front |
| Engine Size | 6276 cc | 4664 cc |
| Engine Cylinders | 8 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 279 HP | 273 HP |
| Engine RPM | 4600 RPM | 5400 RPM |
| Torque | 587 Nm | 426 Nm |
| Torque RPM | 2800 RPM | 3400 RPM |
| Engine Bore Size | 108 mm | 94 mm |
| Engine Stroke Size | 85.9 mm | 84 mm |
| Engine Compression Ratio | 10.0:1 | 10.0:1 |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1975 kg | 1356 kg |
| Vehicle Length | 4860 mm | 5190 mm |
| Vehicle Width | 1760 mm | 2010 mm |
| Vehicle Height | 1360 mm | 1920 mm |
| Wheelbase Size | 2780 mm | 3010 mm |
| Fuel Tank Capacity | 72 L | 100 L |
