1967 Lancia Flaminia vs. 2012 Hyundai ix20
To start off, 2012 Hyundai ix20 is newer by 45 year(s). Which means there will be less support and parts availability for 1967 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1967 Lancia Flaminia would be higher. At 2,775 cc (6 cylinders), 1967 Lancia Flaminia is equipped with a bigger engine. In terms of performance, 1967 Lancia Flaminia (148 HP @ 5400 RPM) has 26 more horse power than 2012 Hyundai ix20. (122 HP @ 6300 RPM). In normal driving conditions, 1967 Lancia Flaminia should accelerate faster than 2012 Hyundai ix20. With that said, vehicle weight also plays an important factor in acceleration. 1967 Lancia Flaminia weights approximately 126 kg more than 2012 Hyundai ix20. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1967 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2012 Hyundai ix20, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1967 Lancia Flaminia (225 Nm @ 3500 RPM) has 69 more torque (in Nm) than 2012 Hyundai ix20. (156 Nm @ 4800 RPM). This means 1967 Lancia Flaminia will have an easier job in driving up hills or pulling heavy equipment than 2012 Hyundai ix20. 2012 Hyundai ix20 has automatic transmission and 1967 Lancia Flaminia has manual transmission. 1967 Lancia Flaminia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Hyundai ix20 will be easier to drive especially in heavy traffic.
Compare all specifications:
1967 Lancia Flaminia | 2012 Hyundai ix20 | |
Make | Lancia | Hyundai |
Model | Flaminia | ix20 |
Year Released | 1967 | 2012 |
Engine Position | Front | Front |
Engine Size | 2775 cc | 1591 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 122 HP |
Engine RPM | 5400 RPM | 6300 RPM |
Torque | 225 Nm | 156 Nm |
Torque RPM | 3500 RPM | 4800 RPM |
Engine Compression Ratio | 9.0:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1420 kg | 1294 kg |
Vehicle Length | 4510 mm | 4100 mm |
Vehicle Width | 1670 mm | 1765 mm |
Vehicle Height | 1290 mm | 1600 mm |
Wheelbase Size | 2530 mm | 2615 mm |
Fuel Consumption Overall | 10.1 L/100km | 6.5 L/100km |