1967 Steyr 500 vs. 2010 GMC Acadia

To start off, 2010 GMC Acadia is newer by 43 year(s). Which means there will be less support and parts availability for 1967 Steyr 500. In addition, the cost of maintenance, including insurance, on 1967 Steyr 500 would be higher. At 3,600 cc (6 cylinders), 2010 GMC Acadia is equipped with a bigger engine. In terms of performance, 2010 GMC Acadia (288 HP @ 6300 RPM) has 269 more horse power than 1967 Steyr 500. (19 HP @ 4600 RPM) In normal driving conditions, 2010 GMC Acadia should accelerate faster than 1967 Steyr 500. With that said, vehicle weight also plays an important factor in acceleration. 2010 GMC Acadia weights approximately 1662 kg more than 1967 Steyr 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1967 Steyr 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Steyr 500. However, in wet, icy, snow, or gravel driving conditions, 2010 GMC Acadia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 GMC Acadia (366 Nm @ 3400 RPM) has 334 more torque (in Nm) than 1967 Steyr 500. (32 Nm @ 2800 RPM). This means 2010 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 1967 Steyr 500. 2010 GMC Acadia has automatic transmission and 1967 Steyr 500 has manual transmission. 1967 Steyr 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 GMC Acadia will be easier to drive especially in heavy traffic.

Compare all specifications: