1968 BMW 1600 vs. 2005 Toyota Ipsum
To start off, 2005 Toyota Ipsum is newer by 37 year(s). Which means there will be less support and parts availability for 1968 BMW 1600. In addition, the cost of maintenance, including insurance, on 1968 BMW 1600 would be higher. At 2,360 cc (4 cylinders), 2005 Toyota Ipsum is equipped with a bigger engine. In terms of performance, 2005 Toyota Ipsum (157 HP @ 5400 RPM) has 57 more horse power than 1968 BMW 1600. (100 HP @ 5500 RPM) In normal driving conditions, 2005 Toyota Ipsum should accelerate faster than 1968 BMW 1600. With that said, vehicle weight also plays an important factor in acceleration. 2005 Toyota Ipsum weights approximately 804 kg more than 1968 BMW 1600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2005 Toyota Ipsum (200 Nm @ 4000 RPM) has 40 more torque (in Nm) than 1968 BMW 1600. (160 Nm @ 3500 RPM). This means 2005 Toyota Ipsum will have an easier job in driving up hills or pulling heavy equipment than 1968 BMW 1600.
Compare all specifications:
| 1968 BMW 1600 | 2005 Toyota Ipsum | |
| Make | BMW | Toyota |
| Model | 1600 | Ipsum |
| Year Released | 1968 | 2005 |
| Engine Position | Front | Front |
| Engine Size | 1990 cc | 2360 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 100 HP | 157 HP |
| Engine RPM | 5500 RPM | 5400 RPM |
| Torque | 160 Nm | 200 Nm |
| Torque RPM | 3500 RPM | 4000 RPM |
| Engine Bore Size | 89 mm | 88.5 mm |
| Engine Stroke Size | 80 mm | 96 mm |
| Engine Compression Ratio | 8.5:1 | 9.6:1 |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 5 seats | 7 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 990 kg | 1794 kg |
| Vehicle Length | 4240 mm | 4660 mm |
| Vehicle Width | 1600 mm | 1770 mm |
| Vehicle Height | 1420 mm | 1670 mm |
| Wheelbase Size | 2510 mm | 2510 mm |
| Fuel Tank Capacity | 46 L | 61 L |
