1968 BMW 2000 vs. 2010 Mazda 5

To start off, 2010 Mazda 5 is newer by 42 year(s). Which means there will be less support and parts availability for 1968 BMW 2000. In addition, the cost of maintenance, including insurance, on 1968 BMW 2000 would be higher. At 2,300 cc (4 cylinders), 2010 Mazda 5 is equipped with a bigger engine. In terms of performance, 2010 Mazda 5 (153 HP @ 6500 RPM) has 35 more horse power than 1968 BMW 2000. (118 HP @ 5500 RPM) In normal driving conditions, 2010 Mazda 5 should accelerate faster than 1968 BMW 2000. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda 5 weights approximately 618 kg more than 1968 BMW 2000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1968 BMW 2000 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 BMW 2000. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 5, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda 5 (200 Nm @ 4500 RPM) has 33 more torque (in Nm) than 1968 BMW 2000. (167 Nm @ 3600 RPM). This means 2010 Mazda 5 will have an easier job in driving up hills or pulling heavy equipment than 1968 BMW 2000. 2010 Mazda 5 has automatic transmission and 1968 BMW 2000 has manual transmission. 1968 BMW 2000 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mazda 5 will be easier to drive especially in heavy traffic.

Compare all specifications:

1968 BMW 2000 2010 Mazda 5
Make BMW Mazda
Model 2000 5
Year Released 1968 2010
Body Type Coupe Minivan
Engine Position Front Front
Engine Size 1991 cc 2300 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 118 HP 153 HP
Engine RPM 5500 RPM 6500 RPM
Torque 167 Nm 200 Nm
Torque RPM 3600 RPM 4500 RPM
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 960 kg 1578 kg
Vehicle Length 4570 mm 4610 mm
Vehicle Width 1730 mm 1753 mm
Vehicle Height 1260 mm 1631 mm
Wheelbase Size 2560 mm 2751 mm
Fuel Tank Capacity 70 L 60 L