1968 BMW 2800 vs. 2009 Chrysler Sebring

To start off, 2009 Chrysler Sebring is newer by 41 year(s). Which means there will be less support and parts availability for 1968 BMW 2800. In addition, the cost of maintenance, including insurance, on 1968 BMW 2800 would be higher. At 2,786 cc (6 cylinders), 1968 BMW 2800 is equipped with a bigger engine. In terms of performance, 2009 Chrysler Sebring (173 HP @ 6000 RPM) has 3 more horse power than 1968 BMW 2800. (170 HP @ 6000 RPM) In normal driving conditions, 2009 Chrysler Sebring should accelerate faster than 1968 BMW 2800. With that said, vehicle weight also plays an important factor in acceleration. 2009 Chrysler Sebring weights approximately 620 kg more than 1968 BMW 2800. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1968 BMW 2800 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 BMW 2800. However, in wet, icy, snow, or gravel driving conditions, 2009 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 BMW 2800 (235 Nm @ 3700 RPM) has 10 more torque (in Nm) than 2009 Chrysler Sebring. (225 Nm @ 4400 RPM). This means 1968 BMW 2800 will have an easier job in driving up hills or pulling heavy equipment than 2009 Chrysler Sebring. 2009 Chrysler Sebring has automatic transmission and 1968 BMW 2800 has manual transmission. 1968 BMW 2800 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

1968 BMW 2800 2009 Chrysler Sebring
Make BMW Chrysler
Model 2800 Sebring
Year Released 1968 2009
Engine Position Front Front
Engine Size 2786 cc 2360 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 170 HP 173 HP
Engine RPM 6000 RPM 6000 RPM
Torque 235 Nm 225 Nm
Torque RPM 3700 RPM 4400 RPM
Engine Compression Ratio 9.0:1 10.5:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1290 kg 1910 kg
Vehicle Length 4660 mm 4850 mm
Vehicle Width 1690 mm 1810 mm
Vehicle Height 1380 mm 1510 mm
Wheelbase Size 2620 mm 2770 mm
Fuel Tank Capacity 70 L 64 L