1968 BMW 2800 vs. 2010 Ford E-150
To start off, 2010 Ford E-150 is newer by 42 year(s). Which means there will be less support and parts availability for 1968 BMW 2800. In addition, the cost of maintenance, including insurance, on 1968 BMW 2800 would be higher. At 4,600 cc (4 cylinders), 2010 Ford E-150 is equipped with a bigger engine. In terms of performance, 2010 Ford E-150 (171 HP @ 6000 RPM) has 1 more horse power than 1968 BMW 2800. (170 HP @ 6000 RPM) In normal driving conditions, 2010 Ford E-150 should accelerate faster than 1968 BMW 2800. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford E-150 weights approximately 232 kg more than 1968 BMW 2800. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 BMW 2800 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 BMW 2800. However, in wet, icy, snow, or gravel driving conditions, 2010 Ford E-150, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 BMW 2800 (235 Nm @ 3700 RPM) has 3 more torque (in Nm) than 2010 Ford E-150. (232 Nm @ 4500 RPM). This means 1968 BMW 2800 will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford E-150. 2010 Ford E-150 has automatic transmission and 1968 BMW 2800 has manual transmission. 1968 BMW 2800 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Ford E-150 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1968 BMW 2800 | 2010 Ford E-150 | |
| Make | BMW | Ford |
| Model | 2800 | E-150 |
| Year Released | 1968 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2786 cc | 4600 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 170 HP | 171 HP |
| Engine RPM | 6000 RPM | 6000 RPM |
| Torque | 235 Nm | 232 Nm |
| Torque RPM | 3700 RPM | 4500 RPM |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1290 kg | 1522 kg |
| Vehicle Length | 4660 mm | 4437 mm |
| Vehicle Width | 1690 mm | 1806 mm |
| Vehicle Height | 1380 mm | 1725 mm |
| Wheelbase Size | 2620 mm | 2619 mm |
| Fuel Tank Capacity | 70 L | 62 L |
