1968 Chevrolet Chevelle vs. 2009 Mercury Milan
To start off, 2009 Mercury Milan is newer by 41 year(s). Which means there will be less support and parts availability for 1968 Chevrolet Chevelle. In addition, the cost of maintenance, including insurance, on 1968 Chevrolet Chevelle would be higher. At 3,768 cc (6 cylinders), 1968 Chevrolet Chevelle is equipped with a bigger engine. In terms of performance, 2009 Mercury Milan (160 HP @ 6250 RPM) has 20 more horse power than 1968 Chevrolet Chevelle. (140 HP @ 4400 RPM) In normal driving conditions, 2009 Mercury Milan should accelerate faster than 1968 Chevrolet Chevelle. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercury Milan weights approximately 424 kg more than 1968 Chevrolet Chevelle. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 Chevrolet Chevelle is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Chevrolet Chevelle. However, in wet, icy, snow, or gravel driving conditions, 2009 Mercury Milan, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Chevrolet Chevelle (298 Nm @ 1600 RPM) has 86 more torque (in Nm) than 2009 Mercury Milan. (212 Nm @ 4250 RPM). This means 1968 Chevrolet Chevelle will have an easier job in driving up hills or pulling heavy equipment than 2009 Mercury Milan. 2009 Mercury Milan has automatic transmission and 1968 Chevrolet Chevelle has manual transmission. 1968 Chevrolet Chevelle will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercury Milan will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1968 Chevrolet Chevelle | 2009 Mercury Milan | |
| Make | Chevrolet | Mercury |
| Model | Chevelle | Milan |
| Year Released | 1968 | 2009 |
| Engine Position | Front | Front |
| Engine Size | 3768 cc | 2261 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 140 HP | 160 HP |
| Engine RPM | 4400 RPM | 6250 RPM |
| Torque | 298 Nm | 212 Nm |
| Torque RPM | 1600 RPM | 4250 RPM |
| Engine Bore Size | 98.4 mm | 87.4 mm |
| Engine Stroke Size | 82.6 mm | 94 mm |
| Engine Compression Ratio | 8.5:1 | 12.3:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1501 kg | 1925 kg |
| Vehicle Length | 5110 mm | 4870 mm |
| Vehicle Width | 1930 mm | 1840 mm |
| Vehicle Height | 1360 mm | 1460 mm |
| Wheelbase Size | 2950 mm | 2730 mm |
| Fuel Tank Capacity | 75 L | 66 L |
