1968 Chevrolet Corvette vs. 1980 Mercury Lynx
To start off, 1980 Mercury Lynx is newer by 12 year(s). Which means there will be less support and parts availability for 1968 Chevrolet Corvette. In addition, the cost of maintenance, including insurance, on 1968 Chevrolet Corvette would be higher. At 6,999 cc (8 cylinders), 1968 Chevrolet Corvette is equipped with a bigger engine. In terms of performance, 1968 Chevrolet Corvette (400 HP) has 330 more horse power than 1980 Mercury Lynx. (70 HP). In normal driving conditions, 1968 Chevrolet Corvette should accelerate faster than 1980 Mercury Lynx. With that said, vehicle weight also plays an important factor in acceleration. 1968 Chevrolet Corvette weights approximately 511 kg more than 1980 Mercury Lynx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 Chevrolet Corvette is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Chevrolet Corvette. However, in wet, icy, snow, or gravel driving conditions, 1980 Mercury Lynx, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Chevrolet Corvette (624 Nm @ 3600 RPM) has 503 more torque (in Nm) than 1980 Mercury Lynx. (121 Nm @ 3000 RPM). This means 1968 Chevrolet Corvette will have an easier job in driving up hills or pulling heavy equipment than 1980 Mercury Lynx.
Compare all specifications:
1968 Chevrolet Corvette | 1980 Mercury Lynx | |
Make | Chevrolet | Mercury |
Model | Corvette | Lynx |
Year Released | 1968 | 1980 |
Engine Position | Front | Front |
Engine Size | 6999 cc | 1597 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 400 HP | 70 HP |
Torque | 624 Nm | 121 Nm |
Torque RPM | 3600 RPM | 3000 RPM |
Engine Compression Ratio | 10.3:1 | 8.8:1 |
Drive Type | Rear | Front |
Vehicle Weight | 1461 kg | 950 kg |
Vehicle Length | 4640 mm | 4170 mm |
Vehicle Width | 1760 mm | 1680 mm |
Vehicle Height | 1220 mm | 1360 mm |
Wheelbase Size | 2500 mm | 2400 mm |