1968 Chevrolet Corvette vs. 1995 Chrysler Sebring
To start off, 1995 Chrysler Sebring is newer by 27 year(s). Which means there will be less support and parts availability for 1968 Chevrolet Corvette. In addition, the cost of maintenance, including insurance, on 1968 Chevrolet Corvette would be higher. At 5,354 cc (8 cylinders), 1968 Chevrolet Corvette is equipped with a bigger engine. In terms of performance, 1968 Chevrolet Corvette (300 HP @ 5000 RPM) has 145 more horse power than 1995 Chrysler Sebring. (155 HP @ 5500 RPM). In normal driving conditions, 1968 Chevrolet Corvette should accelerate faster than 1995 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1968 Chevrolet Corvette weights approximately 140 kg more than 1995 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 Chevrolet Corvette is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Chevrolet Corvette. However, in wet, icy, snow, or gravel driving conditions, 1995 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Chevrolet Corvette (488 Nm @ 3400 RPM) has 270 more torque (in Nm) than 1995 Chrysler Sebring. (218 Nm @ 4400 RPM). This means 1968 Chevrolet Corvette will have an easier job in driving up hills or pulling heavy equipment than 1995 Chrysler Sebring. 1995 Chrysler Sebring has automatic transmission and 1968 Chevrolet Corvette has manual transmission. 1968 Chevrolet Corvette will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1995 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1968 Chevrolet Corvette | 1995 Chrysler Sebring | |
| Make | Chevrolet | Chrysler |
| Model | Corvette | Sebring |
| Year Released | 1968 | 1995 |
| Body Type | Coupe | Coupe |
| Engine Position | Front | Front |
| Engine Size | 5354 cc | 2497 cc |
| Engine Cylinders | 8 cylinders | 6 cylinders |
| Engine Type | V | V |
| Horse Power | 300 HP | 155 HP |
| Engine RPM | 5000 RPM | 5500 RPM |
| Torque | 488 Nm | 218 Nm |
| Torque RPM | 3400 RPM | 4400 RPM |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 4 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1450 kg | 1310 kg |
| Vehicle Length | 4640 mm | 4770 mm |
| Vehicle Width | 1760 mm | 1780 mm |
| Vehicle Height | 1200 mm | 1300 mm |
| Wheelbase Size | 2500 mm | 2640 mm |
| Fuel Tank Capacity | 75 L | 60 L |
