1968 Dodge Coronet vs. 1983 Ferrari 208

To start off, 1983 Ferrari 208 is newer by 15 year(s). Which means there will be less support and parts availability for 1968 Dodge Coronet. In addition, the cost of maintenance, including insurance, on 1968 Dodge Coronet would be higher. At 3,690 cc (6 cylinders), 1968 Dodge Coronet is equipped with a bigger engine. In terms of performance, 1983 Ferrari 208 (153 HP @ 6600 RPM) has 10 more horse power than 1968 Dodge Coronet. (143 HP @ 4000 RPM) In normal driving conditions, 1983 Ferrari 208 should accelerate faster than 1968 Dodge Coronet. With that said, vehicle weight also plays an important factor in acceleration. 1968 Dodge Coronet weights approximately 55 kg more than 1983 Ferrari 208.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Dodge Coronet (293 Nm @ 2400 RPM) has 123 more torque (in Nm) than 1983 Ferrari 208. (170 Nm @ 3900 RPM). This means 1968 Dodge Coronet will have an easier job in driving up hills or pulling heavy equipment than 1983 Ferrari 208.

Compare all specifications:

1968 Dodge Coronet 1983 Ferrari 208
Make Dodge Ferrari
Model Coronet 208
Year Released 1968 1983
Engine Position Front Middle
Engine Size 3690 cc 1991 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 143 HP 153 HP
Engine RPM 4000 RPM 6600 RPM
Torque 293 Nm 170 Nm
Torque RPM 2400 RPM 3900 RPM
Engine Bore Size 86.3 mm 66.8 mm
Engine Stroke Size 104.8 mm 71 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Vehicle Weight 1360 kg 1305 kg
Vehicle Length 5250 mm 4240 mm
Vehicle Width 1950 mm 1730 mm
Vehicle Height 1400 mm 1130 mm
Wheelbase Size 2980 mm 2350 mm