1968 Ferrari Dino vs. 2013 Toyota Highlander
To start off, 2013 Toyota Highlander is newer by 45 year(s). Which means there will be less support and parts availability for 1968 Ferrari Dino. In addition, the cost of maintenance, including insurance, on 1968 Ferrari Dino would be higher. At 3,500 cc (6 cylinders), 2013 Toyota Highlander is equipped with a bigger engine. In terms of performance, 2013 Toyota Highlander (266 HP @ 5800 RPM) has 89 more horse power than 1968 Ferrari Dino. (177 HP @ 8000 RPM) In normal driving conditions, 2013 Toyota Highlander should accelerate faster than 1968 Ferrari Dino. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Highlander weights approximately 605 kg more than 1968 Ferrari Dino. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 Ferrari Dino is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Ferrari Dino. However, in wet, icy, snow, or gravel driving conditions, 2013 Toyota Highlander, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Toyota Highlander (252 Nm @ 4100 RPM) has 65 more torque (in Nm) than 1968 Ferrari Dino. (187 Nm @ 6500 RPM). This means 2013 Toyota Highlander will have an easier job in driving up hills or pulling heavy equipment than 1968 Ferrari Dino. 2013 Toyota Highlander has automatic transmission and 1968 Ferrari Dino has manual transmission. 1968 Ferrari Dino will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Toyota Highlander will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1968 Ferrari Dino | 2013 Toyota Highlander | |
| Make | Ferrari | Toyota |
| Model | Dino | Highlander |
| Year Released | 1968 | 2013 |
| Body Type | Coupe | SUV |
| Engine Position | Middle | Front |
| Engine Size | 1987 cc | 3500 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | V | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 177 HP | 266 HP |
| Engine RPM | 8000 RPM | 5800 RPM |
| Torque | 187 Nm | 252 Nm |
| Torque RPM | 6500 RPM | 4100 RPM |
| Engine Bore Size | 86 mm | 90 mm |
| Engine Stroke Size | 57 mm | 105 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 5-speed automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1140 kg | 1745 kg |
| Vehicle Length | 4150 mm | 4785 mm |
| Vehicle Width | 1710 mm | 1910 mm |
| Vehicle Height | 1070 mm | 1760 mm |
| Wheelbase Size | 2410 mm | 2790 mm |
| Fuel Tank Capacity | 65 L | 73 L |
