1968 Fiat 125 vs. 1952 Triumph Renown
To start off, 1968 Fiat 125 is newer by 16 year(s). Which means there will be less support and parts availability for 1952 Triumph Renown. In addition, the cost of maintenance, including insurance, on 1952 Triumph Renown would be higher. At 1,997 cc (4 cylinders), 1952 Triumph Renown is equipped with a bigger engine. In terms of performance, 1968 Fiat 125 (90 HP @ 5600 RPM) has 24 more horse power than 1952 Triumph Renown. (66 HP @ 4200 RPM). In normal driving conditions, 1968 Fiat 125 should accelerate faster than 1952 Triumph Renown. With that said, vehicle weight also plays an important factor in acceleration. 1952 Triumph Renown weights approximately 320 kg more than 1968 Fiat 125.
Let's talk about torque, 1952 Triumph Renown (147 Nm @ 2000 RPM) has 16 more torque (in Nm) than 1968 Fiat 125. (131 Nm @ 4000 RPM). This means 1952 Triumph Renown will have an easier job in driving up hills or pulling heavy equipment than 1968 Fiat 125.
Compare all specifications:
| 1968 Fiat 125 | 1952 Triumph Renown | |
| Make | Fiat | Triumph |
| Model | 125 | Renown |
| Year Released | 1968 | 1952 |
| Engine Position | Front | Front |
| Engine Size | 1608 cc | 1997 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 90 HP | 66 HP |
| Engine RPM | 5600 RPM | 4200 RPM |
| Torque | 131 Nm | 147 Nm |
| Torque RPM | 4000 RPM | 2000 RPM |
| Engine Bore Size | 80 mm | 85 mm |
| Engine Stroke Size | 80 mm | 92 mm |
| Engine Compression Ratio | 8.8:1 | 9.0:1 |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 960 kg | 1280 kg |
| Vehicle Length | 4230 mm | 4450 mm |
| Vehicle Width | 1610 mm | 1630 mm |
| Vehicle Height | 1450 mm | 1610 mm |
| Wheelbase Size | 2430 mm | 2750 mm |
