1968 Fiat 500 vs. 1948 Humber Pullman
To start off, 1968 Fiat 500 is newer by 20 year(s). Which means there will be less support and parts availability for 1948 Humber Pullman. In addition, the cost of maintenance, including insurance, on 1948 Humber Pullman would be higher. At 4,086 cc (6 cylinders), 1948 Humber Pullman is equipped with a bigger engine. In terms of performance, 1948 Humber Pullman (100 HP @ 3400 RPM) has 82 more horse power than 1968 Fiat 500. (18 HP @ 4600 RPM) In normal driving conditions, 1948 Humber Pullman should accelerate faster than 1968 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1948 Humber Pullman weights approximately 1590 kg more than 1968 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1968 Fiat 500 | 1948 Humber Pullman | |
| Make | Fiat | Humber |
| Model | 500 | Pullman |
| Year Released | 1968 | 1948 |
| Engine Position | Rear | Front |
| Engine Size | 499 cc | 4086 cc |
| Engine Cylinders | 2 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 18 HP | 100 HP |
| Engine RPM | 4600 RPM | 3400 RPM |
| Engine Bore Size | 67.5 mm | 85 mm |
| Engine Stroke Size | 70 mm | 120 mm |
| Engine Compression Ratio | 9.0:1 | 6.3:1 |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 4 seats | 8 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 510 kg | 2100 kg |
| Vehicle Length | 3030 mm | 5350 mm |
| Vehicle Width | 1330 mm | 1900 mm |
| Wheelbase Size | 1850 mm | 3330 mm |
