1968 Fiat 500 vs. 1968 Jensen FF
To start off, both 1968 Fiat 500 and 1968 Jensen FF were released in the same year (1968). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 6,276 cc (8 cylinders), 1968 Jensen FF is equipped with a bigger engine. In terms of performance, 1968 Jensen FF (279 HP @ 4600 RPM) has 261 more horse power than 1968 Fiat 500. (18 HP @ 4600 RPM) In normal driving conditions, 1968 Jensen FF should accelerate faster than 1968 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1968 Jensen FF weights approximately 1465 kg more than 1968 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1968 Jensen FF (587 Nm @ 2800 RPM) has 560 more torque (in Nm) than 1968 Fiat 500. (27 Nm @ 3200 RPM). This means 1968 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 1968 Fiat 500.
Compare all specifications:
1968 Fiat 500 | 1968 Jensen FF | |
Make | Fiat | Jensen |
Model | 500 | FF |
Year Released | 1968 | 1968 |
Engine Position | Rear | Front |
Engine Size | 499 cc | 6276 cc |
Engine Cylinders | 2 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 18 HP | 279 HP |
Engine RPM | 4600 RPM | 4600 RPM |
Torque | 27 Nm | 587 Nm |
Torque RPM | 3200 RPM | 2800 RPM |
Engine Bore Size | 67.5 mm | 108 mm |
Engine Stroke Size | 70 mm | 85.9 mm |
Engine Compression Ratio | 9.0:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 510 kg | 1975 kg |
Vehicle Length | 3030 mm | 4860 mm |
Vehicle Width | 1330 mm | 1760 mm |
Vehicle Height | 1330 mm | 1360 mm |
Wheelbase Size | 1850 mm | 2780 mm |
Fuel Tank Capacity | 22 L | 72 L |