1968 Fiat 850 vs. 1968 Ford 12 M

To start off, both 1968 Fiat 850 and 1968 Ford 12 M were released in the same year (1968). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,182 cc (4 cylinders), 1968 Ford 12 M is equipped with a bigger engine. In terms of performance, 1968 Fiat 850 (51 HP @ 6500 RPM) has 7 more horse power than 1968 Ford 12 M. (44 HP @ 4500 RPM). In normal driving conditions, 1968 Fiat 850 should accelerate faster than 1968 Ford 12 M. With that said, vehicle weight also plays an important factor in acceleration. 1968 Ford 12 M weights approximately 135 kg more than 1968 Fiat 850.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Ford 12 M (80 Nm @ 2400 RPM) has 15 more torque (in Nm) than 1968 Fiat 850. (65 Nm @ 4000 RPM). This means 1968 Ford 12 M will have an easier job in driving up hills or pulling heavy equipment than 1968 Fiat 850.

Compare all specifications:

1968 Fiat 850 1968 Ford 12 M
Make Fiat Ford
Model 850 12 M
Year Released 1968 1968
Engine Position Rear Front
Engine Size 903 cc 1182 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 51 HP 44 HP
Engine RPM 6500 RPM 4500 RPM
Torque 65 Nm 80 Nm
Torque RPM 4000 RPM 2400 RPM
Engine Compression Ratio 9.5:1 9.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 715 kg 850 kg
Vehicle Length 3660 mm 4320 mm
Vehicle Width 1510 mm 1610 mm
Vehicle Height 1360 mm 1410 mm
Wheelbase Size 2030 mm 2530 mm
Fuel Tank Capacity 30 L 40 L