1968 Ford GT 40 vs. 1980 Volvo 260

To start off, 1980 Volvo 260 is newer by 12 year(s). Which means there will be less support and parts availability for 1968 Ford GT 40. In addition, the cost of maintenance, including insurance, on 1968 Ford GT 40 would be higher. At 4,948 cc (8 cylinders), 1968 Ford GT 40 is equipped with a bigger engine. In terms of performance, 1968 Ford GT 40 (424 HP @ 6500 RPM) has 278 more horse power than 1980 Volvo 260. (146 HP @ 5700 RPM). In normal driving conditions, 1968 Ford GT 40 should accelerate faster than 1980 Volvo 260. With that said, vehicle weight also plays an important factor in acceleration. 1980 Volvo 260 weights approximately 390 kg more than 1968 Ford GT 40.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Ford GT 40 (637 Nm @ 5000 RPM) has 419 more torque (in Nm) than 1980 Volvo 260. (218 Nm @ 3000 RPM). This means 1968 Ford GT 40 will have an easier job in driving up hills or pulling heavy equipment than 1980 Volvo 260.

Compare all specifications:

1968 Ford GT 40 1980 Volvo 260
Make Ford Volvo
Model GT 40 260
Year Released 1968 1980
Engine Position Middle Front
Engine Size 4948 cc 2664 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type V V
Horse Power 424 HP 146 HP
Engine RPM 6500 RPM 5700 RPM
Torque 637 Nm 218 Nm
Torque RPM 5000 RPM 3000 RPM
Engine Compression Ratio 10.5:1 9.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Vehicle Weight 960 kg 1350 kg
Vehicle Length 4350 mm 4890 mm
Vehicle Width 1800 mm 1720 mm
Vehicle Height 980 mm 1440 mm
Wheelbase Size 2420 mm 2660 mm