1968 Holden Belmont vs. 2010 Chevrolet Epica
To start off, 2010 Chevrolet Epica is newer by 42 year(s). Which means there will be less support and parts availability for 1968 Holden Belmont. In addition, the cost of maintenance, including insurance, on 1968 Holden Belmont would be higher. At 2,490 cc (6 cylinders), 2010 Chevrolet Epica is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Epica (154 HP @ 5800 RPM) has 78 more horse power than 1968 Holden Belmont. (76 HP @ 4400 RPM) In normal driving conditions, 2010 Chevrolet Epica should accelerate faster than 1968 Holden Belmont. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Epica weights approximately 375 kg more than 1968 Holden Belmont. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 Holden Belmont is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Holden Belmont. However, in wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Epica, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Epica (237 Nm @ 4000 RPM) has 74 more torque (in Nm) than 1968 Holden Belmont. (163 Nm @ 4400 RPM). This means 2010 Chevrolet Epica will have an easier job in driving up hills or pulling heavy equipment than 1968 Holden Belmont. 2010 Chevrolet Epica has automatic transmission and 1968 Holden Belmont has manual transmission. 1968 Holden Belmont will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Epica will be easier to drive especially in heavy traffic.
Compare all specifications:
1968 Holden Belmont | 2010 Chevrolet Epica | |
Make | Holden | Chevrolet |
Model | Belmont | Epica |
Year Released | 1968 | 2010 |
Engine Position | Front | Front |
Engine Size | 2130 cc | 2490 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 76 HP | 154 HP |
Engine RPM | 4400 RPM | 5800 RPM |
Torque | 163 Nm | 237 Nm |
Torque RPM | 4400 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1200 kg | 1575 kg |
Vehicle Length | 4700 mm | 4810 mm |
Vehicle Width | 1830 mm | 1820 mm |
Vehicle Height | 1420 mm | 1460 mm |
Wheelbase Size | 2830 mm | 2710 mm |