1968 Holden Monaro vs. 2010 Chrysler Sebring

To start off, 2010 Chrysler Sebring is newer by 42 year(s). Which means there will be less support and parts availability for 1968 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1968 Holden Monaro would be higher. At 5,024 cc (8 cylinders), 1968 Holden Monaro is equipped with a bigger engine. In terms of performance, 1968 Holden Monaro (181 HP @ 4600 RPM) has 10 more horse power than 2010 Chrysler Sebring. (171 HP @ 6000 RPM). In normal driving conditions, 1968 Holden Monaro should accelerate faster than 2010 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 170 kg more than 1968 Holden Monaro.

Because 1968 Holden Monaro is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Holden Monaro. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Holden Monaro (407 Nm @ 2400 RPM) has 241 more torque (in Nm) than 2010 Chrysler Sebring. (166 Nm @ 4400 RPM). This means 1968 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2010 Chrysler Sebring has automatic transmission and 1968 Holden Monaro has manual transmission. 1968 Holden Monaro will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

1968 Holden Monaro 2010 Chrysler Sebring
Make Holden Chrysler
Model Monaro Sebring
Year Released 1968 2010
Engine Position Front Front
Engine Size 5024 cc 2399 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 181 HP 171 HP
Engine RPM 4600 RPM 6000 RPM
Torque 407 Nm 166 Nm
Torque RPM 2400 RPM 4400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Vehicle Weight 1460 kg 1630 kg
Vehicle Length 4700 mm 4850 mm
Vehicle Width 1830 mm 1810 mm
Vehicle Height 1400 mm 1550 mm
Wheelbase Size 2830 mm 2770 mm