1968 Holden Monaro vs. 2011 Nissan Juke

To start off, 2011 Nissan Juke is newer by 43 year(s). Which means there will be less support and parts availability for 1968 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1968 Holden Monaro would be higher. At 3,043 cc (6 cylinders), 1968 Holden Monaro is equipped with a bigger engine. In terms of performance, 2011 Nissan Juke (188 HP @ 5600 RPM) has 80 more horse power than 1968 Holden Monaro. (108 HP @ 4200 RPM) In normal driving conditions, 2011 Nissan Juke should accelerate faster than 1968 Holden Monaro. With that said, vehicle weight also plays an important factor in acceleration. 2011 Nissan Juke weights approximately 44 kg more than 1968 Holden Monaro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2011 Nissan Juke is all wheel drive (AWD), it will have significant more traction and grip than 1968 Holden Monaro. In wet, icy, snow, or gravel driving conditions, 2011 Nissan Juke will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Holden Monaro (245 Nm @ 1600 RPM) has 5 more torque (in Nm) than 2011 Nissan Juke. (240 Nm @ 2000 RPM). This means 1968 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 2011 Nissan Juke.

Compare all specifications:

1968 Holden Monaro 2011 Nissan Juke
Make Holden Nissan
Model Monaro Juke
Year Released 1968 2011
Engine Position Front Front
Engine Size 3043 cc 1600 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 108 HP 188 HP
Engine RPM 4200 RPM 5600 RPM
Torque 245 Nm 240 Nm
Torque RPM 1600 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear AWD
Vehicle Weight 1290 kg 1334 kg
Vehicle Length 4700 mm 4125 mm
Vehicle Width 1830 mm 1765 mm
Vehicle Height 1400 mm 1570 mm
Wheelbase Size 2830 mm 2530 mm