1968 Innocenti IM 3 vs. 2010 GMC Yukon
To start off, 2010 GMC Yukon is newer by 42 year(s). Which means there will be less support and parts availability for 1968 Innocenti IM 3. In addition, the cost of maintenance, including insurance, on 1968 Innocenti IM 3 would be higher. At 6,200 cc (8 cylinders), 2010 GMC Yukon is equipped with a bigger engine. In terms of performance, 2010 GMC Yukon (403 HP @ 5700 RPM) has 347 more horse power than 1968 Innocenti IM 3. (56 HP @ 5500 RPM) In normal driving conditions, 2010 GMC Yukon should accelerate faster than 1968 Innocenti IM 3. With that said, vehicle weight also plays an important factor in acceleration. 2010 GMC Yukon weights approximately 1643 kg more than 1968 Innocenti IM 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 GMC Yukon is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 GMC Yukon. However, in wet, icy, snow, or gravel driving conditions, 1968 Innocenti IM 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 GMC Yukon (565 Nm @ 4300 RPM) has 481 more torque (in Nm) than 1968 Innocenti IM 3. (84 Nm @ 2500 RPM). This means 2010 GMC Yukon will have an easier job in driving up hills or pulling heavy equipment than 1968 Innocenti IM 3. 2010 GMC Yukon has automatic transmission and 1968 Innocenti IM 3 has manual transmission. 1968 Innocenti IM 3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 GMC Yukon will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1968 Innocenti IM 3 | 2010 GMC Yukon | |
| Make | Innocenti | GMC |
| Model | IM 3 | Yukon |
| Year Released | 1968 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1096 cc | 6200 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 56 HP | 403 HP |
| Engine RPM | 5500 RPM | 5700 RPM |
| Torque | 84 Nm | 565 Nm |
| Torque RPM | 2500 RPM | 4300 RPM |
| Fuel Type | Gasoline | Flex Fuel |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 890 kg | 2533 kg |
| Vehicle Length | 3760 mm | 5131 mm |
| Vehicle Width | 1570 mm | 2007 mm |
| Vehicle Height | 1380 mm | 1956 mm |
| Wheelbase Size | 2380 mm | 2946 mm |
| Fuel Tank Capacity | 40 L | 98 L |
