1968 Innocenti IM 3 vs. 2010 Jeep Commander

To start off, 2010 Jeep Commander is newer by 42 year(s). Which means there will be less support and parts availability for 1968 Innocenti IM 3. In addition, the cost of maintenance, including insurance, on 1968 Innocenti IM 3 would be higher. At 4,701 cc (8 cylinders), 2010 Jeep Commander is equipped with a bigger engine. In terms of performance, 2010 Jeep Commander (305 HP @ 5650 RPM) has 249 more horse power than 1968 Innocenti IM 3. (56 HP @ 5500 RPM) In normal driving conditions, 2010 Jeep Commander should accelerate faster than 1968 Innocenti IM 3. With that said, vehicle weight also plays an important factor in acceleration. 2010 Jeep Commander weights approximately 508 kg more than 1968 Innocenti IM 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Jeep Commander is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Jeep Commander. However, in wet, icy, snow, or gravel driving conditions, 1968 Innocenti IM 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Jeep Commander (453 Nm @ 3950 RPM) has 369 more torque (in Nm) than 1968 Innocenti IM 3. (84 Nm @ 2500 RPM). This means 2010 Jeep Commander will have an easier job in driving up hills or pulling heavy equipment than 1968 Innocenti IM 3. 2010 Jeep Commander has automatic transmission and 1968 Innocenti IM 3 has manual transmission. 1968 Innocenti IM 3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Jeep Commander will be easier to drive especially in heavy traffic.

Compare all specifications:

1968 Innocenti IM 3 2010 Jeep Commander
Make Innocenti Jeep
Model IM 3 Commander
Year Released 1968 2010
Engine Position Front Front
Engine Size 1096 cc 4701 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 56 HP 305 HP
Engine RPM 5500 RPM 5650 RPM
Torque 84 Nm 453 Nm
Torque RPM 2500 RPM 3950 RPM
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Doors 2 doors 5 doors
Vehicle Weight 890 kg 1398 kg
Vehicle Length 3760 mm 4790 mm
Vehicle Width 1570 mm 1910 mm
Vehicle Height 1380 mm 1840 mm
Wheelbase Size 2380 mm 2790 mm
Fuel Tank Capacity 40 L 80 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]