1968 Isuzu Bellett vs. 1980 Reliant Scimitar
To start off, 1980 Reliant Scimitar is newer by 12 year(s). Which means there will be less support and parts availability for 1968 Isuzu Bellett. In addition, the cost of maintenance, including insurance, on 1968 Isuzu Bellett would be higher. At 2,790 cc (6 cylinders), 1980 Reliant Scimitar is equipped with a bigger engine. In terms of performance, 1980 Reliant Scimitar (133 HP @ 5200 RPM) has 57 more horse power than 1968 Isuzu Bellett. (76 HP @ 5200 RPM) In normal driving conditions, 1980 Reliant Scimitar should accelerate faster than 1968 Isuzu Bellett. With that said, vehicle weight also plays an important factor in acceleration. 1980 Reliant Scimitar weights approximately 285 kg more than 1968 Isuzu Bellett. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1980 Reliant Scimitar (206 Nm @ 3000 RPM) has 92 more torque (in Nm) than 1968 Isuzu Bellett. (114 Nm @ 2600 RPM). This means 1980 Reliant Scimitar will have an easier job in driving up hills or pulling heavy equipment than 1968 Isuzu Bellett.
Compare all specifications:
| 1968 Isuzu Bellett | 1980 Reliant Scimitar | |
| Make | Isuzu | Reliant |
| Model | Bellett | Scimitar |
| Year Released | 1968 | 1980 |
| Engine Position | Front | Front |
| Engine Size | 1471 cc | 2790 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 76 HP | 133 HP |
| Engine RPM | 5200 RPM | 5200 RPM |
| Torque | 114 Nm | 206 Nm |
| Torque RPM | 2600 RPM | 3000 RPM |
| Engine Compression Ratio | 9.3:1 | 9.2:1 |
| Fuel Type | Gasoline | Gasoline |
| Vehicle Weight | 980 kg | 1265 kg |
| Vehicle Length | 4040 mm | 4450 mm |
| Vehicle Width | 1500 mm | 1720 mm |
| Vehicle Height | 1400 mm | 1330 mm |
| Wheelbase Size | 2360 mm | 2640 mm |
