1968 Jensen FF vs. 1977 Simca 1307
To start off, 1977 Simca 1307 is newer by 9 year(s). Which means there will be less support and parts availability for 1968 Jensen FF. In addition, the cost of maintenance, including insurance, on 1968 Jensen FF would be higher. At 6,276 cc (8 cylinders), 1968 Jensen FF is equipped with a bigger engine. In terms of performance, 1968 Jensen FF (279 HP @ 4600 RPM) has 212 more horse power than 1977 Simca 1307. (67 HP @ 5600 RPM). In normal driving conditions, 1968 Jensen FF should accelerate faster than 1977 Simca 1307. With that said, vehicle weight also plays an important factor in acceleration. 1968 Jensen FF weights approximately 925 kg more than 1977 Simca 1307. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1968 Jensen FF (587 Nm @ 2800 RPM) has 482 more torque (in Nm) than 1977 Simca 1307. (105 Nm @ 2800 RPM). This means 1968 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 1977 Simca 1307.
Compare all specifications:
| 1968 Jensen FF | 1977 Simca 1307 | |
| Make | Jensen | Simca |
| Model | FF | 1307 |
| Year Released | 1968 | 1977 |
| Engine Position | Front | Front |
| Engine Size | 6276 cc | 1294 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 279 HP | 67 HP |
| Engine RPM | 4600 RPM | 5600 RPM |
| Torque | 587 Nm | 105 Nm |
| Torque RPM | 2800 RPM | 2800 RPM |
| Engine Bore Size | 108 mm | 76.7 mm |
| Engine Stroke Size | 85.9 mm | 70 mm |
| Engine Compression Ratio | 10.0:1 | 9.5:1 |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1975 kg | 1050 kg |
| Vehicle Length | 4860 mm | 4250 mm |
| Vehicle Width | 1760 mm | 1690 mm |
| Vehicle Height | 1360 mm | 1400 mm |
| Wheelbase Size | 2780 mm | 2610 mm |
| Fuel Tank Capacity | 72 L | 58 L |
