1968 Jensen FF vs. 2003 Toyota Allion
To start off, 2003 Toyota Allion is newer by 35 year(s). Which means there will be less support and parts availability for 1968 Jensen FF. In addition, the cost of maintenance, including insurance, on 1968 Jensen FF would be higher. At 6,276 cc (8 cylinders), 1968 Jensen FF is equipped with a bigger engine. In terms of performance, 1968 Jensen FF (279 HP @ 4600 RPM) has 165 more horse power than 2003 Toyota Allion. (114 HP @ 6000 RPM). In normal driving conditions, 1968 Jensen FF should accelerate faster than 2003 Toyota Allion. With that said, vehicle weight also plays an important factor in acceleration. 1968 Jensen FF weights approximately 835 kg more than 2003 Toyota Allion. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1968 Jensen FF (587 Nm @ 2800 RPM) has 437 more torque (in Nm) than 2003 Toyota Allion. (150 Nm @ 4200 RPM). This means 1968 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 2003 Toyota Allion.
Compare all specifications:
| 1968 Jensen FF | 2003 Toyota Allion | |
| Make | Jensen | Toyota |
| Model | FF | Allion |
| Year Released | 1968 | 2003 |
| Engine Position | Front | Front |
| Engine Size | 6276 cc | 1497 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 279 HP | 114 HP |
| Engine RPM | 4600 RPM | 6000 RPM |
| Torque | 587 Nm | 150 Nm |
| Torque RPM | 2800 RPM | 4200 RPM |
| Engine Bore Size | 108 mm | 75 mm |
| Engine Stroke Size | 85.9 mm | 84.7 mm |
| Engine Compression Ratio | 10.0:1 | 10.5:1 |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1975 kg | 1140 kg |
| Vehicle Length | 4860 mm | 4560 mm |
| Vehicle Width | 1760 mm | 1700 mm |
| Vehicle Height | 1360 mm | 1480 mm |
| Wheelbase Size | 2780 mm | 2710 mm |
