1968 Jensen FF vs. 2010 Pontiac G6
To start off, 2010 Pontiac G6 is newer by 42 year(s). Which means there will be less support and parts availability for 1968 Jensen FF. In addition, the cost of maintenance, including insurance, on 1968 Jensen FF would be higher. At 6,276 cc (8 cylinders), 1968 Jensen FF is equipped with a bigger engine. In terms of performance, 1968 Jensen FF (279 HP @ 4600 RPM) has 117 more horse power than 2010 Pontiac G6. (162 HP @ 6400 RPM). In normal driving conditions, 1968 Jensen FF should accelerate faster than 2010 Pontiac G6. With that said, vehicle weight also plays an important factor in acceleration. 2010 Pontiac G6 weights approximately 10 kg more than 1968 Jensen FF.
Let's talk about torque, 1968 Jensen FF (587 Nm @ 2800 RPM) has 431 more torque (in Nm) than 2010 Pontiac G6. (156 Nm @ 5000 RPM). This means 1968 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 2010 Pontiac G6.
Compare all specifications:
1968 Jensen FF | 2010 Pontiac G6 | |
Make | Jensen | Pontiac |
Model | FF | G6 |
Year Released | 1968 | 2010 |
Engine Position | Front | Front |
Engine Size | 6276 cc | 2384 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 279 HP | 162 HP |
Engine RPM | 4600 RPM | 6400 RPM |
Torque | 587 Nm | 156 Nm |
Torque RPM | 2800 RPM | 5000 RPM |
Engine Bore Size | 108 mm | 87.9 mm |
Engine Stroke Size | 85.9 mm | 97.8 mm |
Engine Compression Ratio | 10.0:1 | 10.4:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1975 kg | 1985 kg |
Vehicle Length | 4860 mm | 4810 mm |
Vehicle Width | 1760 mm | 1800 mm |
Vehicle Height | 1360 mm | 1460 mm |
Wheelbase Size | 2780 mm | 2860 mm |
Fuel Tank Capacity | 72 L | 61 L |