1968 Lancia Fulvia vs. 2010 Mercedes-Benz Sprinter
To start off, 2010 Mercedes-Benz Sprinter is newer by 42 year(s). Which means there will be less support and parts availability for 1968 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1968 Lancia Fulvia would be higher. At 3,000 cc (6 cylinders), 2010 Mercedes-Benz Sprinter is equipped with a bigger engine. In terms of performance, 2010 Mercedes-Benz Sprinter (188 HP @ 3800 RPM) has 76 more horse power than 1968 Lancia Fulvia. (112 HP @ 6000 RPM) In normal driving conditions, 2010 Mercedes-Benz Sprinter should accelerate faster than 1968 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mercedes-Benz Sprinter weights approximately 1305 kg more than 1968 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Mercedes-Benz Sprinter is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Mercedes-Benz Sprinter. However, in wet, icy, snow, or gravel driving conditions, 1968 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mercedes-Benz Sprinter (440 Nm @ 1400 RPM) has 286 more torque (in Nm) than 1968 Lancia Fulvia. (154 Nm @ 4500 RPM). This means 2010 Mercedes-Benz Sprinter will have an easier job in driving up hills or pulling heavy equipment than 1968 Lancia Fulvia. 2010 Mercedes-Benz Sprinter has automatic transmission and 1968 Lancia Fulvia has manual transmission. 1968 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mercedes-Benz Sprinter will be easier to drive especially in heavy traffic.
Compare all specifications:
1968 Lancia Fulvia | 2010 Mercedes-Benz Sprinter | |
Make | Lancia | Mercedes-Benz |
Model | Fulvia | Sprinter |
Year Released | 1968 | 2010 |
Body Type | Coupe | Van |
Engine Position | Front | Front |
Engine Size | 1584 cc | 3000 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 112 HP | 188 HP |
Engine RPM | 6000 RPM | 3800 RPM |
Torque | 154 Nm | 440 Nm |
Torque RPM | 4500 RPM | 1400 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1000 kg | 2305 kg |
Vehicle Length | 3990 mm | 5906 mm |
Vehicle Width | 1570 mm | 2024 mm |
Vehicle Height | 1330 mm | 2446 mm |
Wheelbase Size | 2340 mm | 3665 mm |
Fuel Tank Capacity | 38 L | 100 L |