1968 Mercedes-Benz 220 vs. 2011 Fiat Panda

To start off, 2011 Fiat Panda is newer by 43 year(s). Which means there will be less support and parts availability for 1968 Mercedes-Benz 220. In addition, the cost of maintenance, including insurance, on 1968 Mercedes-Benz 220 would be higher. At 2,197 cc (4 cylinders), 1968 Mercedes-Benz 220 is equipped with a bigger engine. In terms of performance, 1968 Mercedes-Benz 220 (106 HP @ 4800 RPM) has 47 more horse power than 2011 Fiat Panda. (59 HP @ 5000 RPM). In normal driving conditions, 1968 Mercedes-Benz 220 should accelerate faster than 2011 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1968 Mercedes-Benz 220 weights approximately 382 kg more than 2011 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1968 Mercedes-Benz 220 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Mercedes-Benz 220. However, in wet, icy, snow, or gravel driving conditions, 2011 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Mercedes-Benz 220 (179 Nm @ 2800 RPM) has 77 more torque (in Nm) than 2011 Fiat Panda. (102 Nm @ 2500 RPM). This means 1968 Mercedes-Benz 220 will have an easier job in driving up hills or pulling heavy equipment than 2011 Fiat Panda. 2011 Fiat Panda has automatic transmission and 1968 Mercedes-Benz 220 has manual transmission. 1968 Mercedes-Benz 220 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Fiat Panda will be easier to drive especially in heavy traffic.

Compare all specifications:

1968 Mercedes-Benz 220 2011 Fiat Panda
Make Mercedes-Benz Fiat
Model 220 Panda
Year Released 1968 2011
Engine Position Front Front
Engine Size 2197 cc 1242 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 106 HP 59 HP
Engine RPM 4800 RPM 5000 RPM
Torque 179 Nm 102 Nm
Torque RPM 2800 RPM 2500 RPM
Engine Bore Size 87 mm 70.9 mm
Engine Stroke Size 92.4 mm 78.9 mm
Engine Compression Ratio 9.0:1 9.8:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1335 kg 953 kg
Vehicle Length 4690 mm 3540 mm
Vehicle Width 1780 mm 1600 mm
Vehicle Height 1450 mm 1580 mm
Wheelbase Size 2760 mm 2310 mm
Fuel Tank Capacity 64 L 35 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]