1968 Mercedes-Benz 280 vs. 2008 Audi A3

To start off, 2008 Audi A3 is newer by 40 year(s). Which means there will be less support and parts availability for 1968 Mercedes-Benz 280. In addition, the cost of maintenance, including insurance, on 1968 Mercedes-Benz 280 would be higher. At 2,744 cc (6 cylinders), 1968 Mercedes-Benz 280 is equipped with a bigger engine. In terms of performance, 1968 Mercedes-Benz 280 (160 HP @ 5500 RPM) has 12 more horse power than 2008 Audi A3. (148 HP @ 6000 RPM). In normal driving conditions, 1968 Mercedes-Benz 280 should accelerate faster than 2008 Audi A3. With that said, vehicle weight also plays an important factor in acceleration. 1968 Mercedes-Benz 280 weights approximately 220 kg more than 2008 Audi A3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1968 Mercedes-Benz 280 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Mercedes-Benz 280. However, in wet, icy, snow, or gravel driving conditions, 2008 Audi A3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Mercedes-Benz 280 (225 Nm @ 4000 RPM) has 24 more torque (in Nm) than 2008 Audi A3. (201 Nm @ 3500 RPM). This means 1968 Mercedes-Benz 280 will have an easier job in driving up hills or pulling heavy equipment than 2008 Audi A3. 2008 Audi A3 has automatic transmission and 1968 Mercedes-Benz 280 has manual transmission. 1968 Mercedes-Benz 280 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Audi A3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1968 Mercedes-Benz 280 2008 Audi A3
Make Mercedes-Benz Audi
Model 280 A3
Year Released 1968 2008
Engine Position Front Front
Engine Size 2744 cc 1984 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 160 HP 148 HP
Engine RPM 5500 RPM 6000 RPM
Torque 225 Nm 201 Nm
Torque RPM 4000 RPM 3500 RPM
Engine Bore Size 86 mm 82.5 mm
Engine Stroke Size 78.8 mm 92.8 mm
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1610 kg 1390 kg
Vehicle Length 4970 mm 4210 mm
Vehicle Width 1870 mm 1770 mm
Vehicle Height 1430 mm 1430 mm
Wheelbase Size 2870 mm 2580 mm
Fuel Tank Capacity 95 L 55 L