1968 Plymouth VIP vs. 1980 Mitsubishi Sigma

To start off, 1980 Mitsubishi Sigma is newer by 12 year(s). Which means there will be less support and parts availability for 1968 Plymouth VIP. In addition, the cost of maintenance, including insurance, on 1968 Plymouth VIP would be higher. At 5,208 cc (8 cylinders), 1968 Plymouth VIP is equipped with a bigger engine. In terms of performance, 1968 Plymouth VIP (230 HP @ 4400 RPM) has 132 more horse power than 1980 Mitsubishi Sigma. (98 HP @ 4400 RPM). In normal driving conditions, 1968 Plymouth VIP should accelerate faster than 1980 Mitsubishi Sigma. With that said, vehicle weight also plays an important factor in acceleration. 1968 Plymouth VIP weights approximately 452 kg more than 1980 Mitsubishi Sigma. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Plymouth VIP (461 Nm @ 2400 RPM) has 273 more torque (in Nm) than 1980 Mitsubishi Sigma. (188 Nm @ 2400 RPM). This means 1968 Plymouth VIP will have an easier job in driving up hills or pulling heavy equipment than 1980 Mitsubishi Sigma.

Compare all specifications:

1968 Plymouth VIP 1980 Mitsubishi Sigma
Make Plymouth Mitsubishi
Model VIP Sigma
Year Released 1968 1980
Engine Position Front Front
Engine Size 5208 cc 2554 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 230 HP 98 HP
Engine RPM 4400 RPM 4400 RPM
Torque 461 Nm 188 Nm
Torque RPM 2400 RPM 2400 RPM
Drive Type Rear Rear
Transmission Type Automatic Automatic
Vehicle Weight 1647 kg 1195 kg
Vehicle Length 5420 mm 4460 mm
Vehicle Width 1980 mm 1660 mm
Vehicle Height 1400 mm 1370 mm
Wheelbase Size 3030 mm 2520 mm