1968 Porsche 911 vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 42 year(s). Which means there will be less support and parts availability for 1968 Porsche 911. In addition, the cost of maintenance, including insurance, on 1968 Porsche 911 would be higher. At 2,736 cc (6 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (187 HP @ 5500 RPM) has 77 more horse power than 1968 Porsche 911. (110 HP @ 5800 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1968 Porsche 911. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 890 kg more than 1968 Porsche 911. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 Porsche 911 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Porsche 911. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (259 Nm @ 4000 RPM) has 101 more torque (in Nm) than 1968 Porsche 911. (158 Nm @ 4200 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1968 Porsche 911. 2010 Chrysler Sebring has automatic transmission and 1968 Porsche 911 has manual transmission. 1968 Porsche 911 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1968 Porsche 911 | 2010 Chrysler Sebring | |
Make | Porsche | Chrysler |
Model | 911 | Sebring |
Year Released | 1968 | 2010 |
Body Type | Coupe | Convertible |
Engine Position | Rear | Front |
Engine Size | 1991 cc | 2736 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | boxer | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 110 HP | 187 HP |
Engine RPM | 5800 RPM | 5500 RPM |
Torque | 158 Nm | 259 Nm |
Torque RPM | 4200 RPM | 4000 RPM |
Engine Bore Size | 80 mm | 86 mm |
Engine Stroke Size | 66 mm | 78.5 mm |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1020 kg | 1910 kg |
Vehicle Length | 4170 mm | 4930 mm |
Vehicle Width | 1620 mm | 1820 mm |
Vehicle Height | 1330 mm | 1490 mm |
Wheelbase Size | 2270 mm | 2770 mm |
Fuel Tank Capacity | 61 L | 64 L |