1969 Aston Martin DB6 vs. 1965 Holden EH
To start off, 1969 Aston Martin DB6 is newer by 4 year(s). Which means there will be less support and parts availability for 1965 Holden EH. In addition, the cost of maintenance, including insurance, on 1965 Holden EH would be higher. At 3,995 cc (6 cylinders), 1969 Aston Martin DB6 is equipped with a bigger engine. In terms of performance, 1969 Aston Martin DB6 (325 HP @ 5750 RPM) has 225 more horse power than 1965 Holden EH. (100 HP @ 4000 RPM). In normal driving conditions, 1969 Aston Martin DB6 should accelerate faster than 1965 Holden EH. With that said, vehicle weight also plays an important factor in acceleration. 1969 Aston Martin DB6 weights approximately 312 kg more than 1965 Holden EH. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Aston Martin DB6 (400 Nm @ 4500 RPM) has 162 more torque (in Nm) than 1965 Holden EH. (238 Nm @ 1600 RPM). This means 1969 Aston Martin DB6 will have an easier job in driving up hills or pulling heavy equipment than 1965 Holden EH. 1965 Holden EH has automatic transmission and 1969 Aston Martin DB6 has manual transmission. 1969 Aston Martin DB6 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1965 Holden EH will be easier to drive especially in heavy traffic.
Compare all specifications:
1969 Aston Martin DB6 | 1965 Holden EH | |
Make | Aston Martin | Holden |
Model | DB6 | EH |
Year Released | 1969 | 1965 |
Engine Position | Front | Front |
Engine Size | 3995 cc | 2930 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 325 HP | 100 HP |
Engine RPM | 5750 RPM | 4000 RPM |
Torque | 400 Nm | 238 Nm |
Torque RPM | 4500 RPM | 1600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1497 kg | 1185 kg |
Vehicle Length | 4630 mm | 4560 mm |
Vehicle Width | 1680 mm | 1740 mm |
Vehicle Height | 1370 mm | 1490 mm |
Wheelbase Size | 2590 mm | 2680 mm |