1969 BMW 2800 vs. 1999 Ford 021 C

To start off, 1999 Ford 021 C is newer by 30 year(s). Which means there will be less support and parts availability for 1969 BMW 2800. In addition, the cost of maintenance, including insurance, on 1969 BMW 2800 would be higher. At 2,786 cc (6 cylinders), 1969 BMW 2800 is equipped with a bigger engine. In terms of performance, 1969 BMW 2800 (170 HP @ 6000 RPM) has 70 more horse power than 1999 Ford 021 C. (100 HP @ 6000 RPM). In normal driving conditions, 1969 BMW 2800 should accelerate faster than 1999 Ford 021 C. With that said, vehicle weight also plays an important factor in acceleration. 1969 BMW 2800 weights approximately 36 kg more than 1999 Ford 021 C. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1969 BMW 2800 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1969 BMW 2800. However, in wet, icy, snow, or gravel driving conditions, 1999 Ford 021 C, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 BMW 2800 (236 Nm) has 90 more torque (in Nm) than 1999 Ford 021 C. (146 Nm). This means 1969 BMW 2800 will have an easier job in driving up hills or pulling heavy equipment than 1999 Ford 021 C. 1999 Ford 021 C has automatic transmission and 1969 BMW 2800 has manual transmission. 1969 BMW 2800 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 Ford 021 C will be easier to drive especially in heavy traffic.

Compare all specifications:

1969 BMW 2800 1999 Ford 021 C
Make BMW Ford
Model 2800 021 C
Year Released 1969 1999
Engine Position Front Front
Engine Size 2786 cc 1596 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 170 HP 100 HP
Engine RPM 6000 RPM 6000 RPM
Torque 236 Nm 146 Nm
Engine Bore Size 86 mm 79 mm
Engine Stroke Size 80 mm 81.3 mm
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 4 seats
Vehicle Weight 1334 kg 1298 kg
Vehicle Length 4710 mm 3610 mm
Vehicle Width 1760 mm 1660 mm
Vehicle Height 1460 mm 1440 mm
Wheelbase Size 2630 mm 2490 mm
Fuel Tank Capacity 70 L 132 L