1969 Chrysler Dodge Phoenix vs. 1970 Lancia Fulvia
To start off, 1970 Lancia Fulvia is newer by 1 year(s). Which means there will be less support and parts availability for 1969 Chrysler Dodge Phoenix. In addition, the cost of maintenance, including insurance, on 1969 Chrysler Dodge Phoenix would be higher. At 5,211 cc (8 cylinders), 1969 Chrysler Dodge Phoenix is equipped with a bigger engine. In terms of performance, 1969 Chrysler Dodge Phoenix (228 HP @ 4400 RPM) has 116 more horse power than 1970 Lancia Fulvia. (112 HP @ 6100 RPM). In normal driving conditions, 1969 Chrysler Dodge Phoenix should accelerate faster than 1970 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 1969 Chrysler Dodge Phoenix weights approximately 710 kg more than 1970 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1969 Chrysler Dodge Phoenix is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1969 Chrysler Dodge Phoenix. However, in wet, icy, snow, or gravel driving conditions, 1970 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Chrysler Dodge Phoenix (462 Nm @ 2400 RPM) has 309 more torque (in Nm) than 1970 Lancia Fulvia. (153 Nm @ 4500 RPM). This means 1969 Chrysler Dodge Phoenix will have an easier job in driving up hills or pulling heavy equipment than 1970 Lancia Fulvia. 1969 Chrysler Dodge Phoenix has automatic transmission and 1970 Lancia Fulvia has manual transmission. 1970 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1969 Chrysler Dodge Phoenix will be easier to drive especially in heavy traffic.
Compare all specifications:
1969 Chrysler Dodge Phoenix | 1970 Lancia Fulvia | |
Make | Chrysler | Lancia |
Model | Dodge Phoenix | Fulvia |
Year Released | 1969 | 1970 |
Engine Position | Front | Front |
Engine Size | 5211 cc | 1584 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 228 HP | 112 HP |
Engine RPM | 4400 RPM | 6100 RPM |
Torque | 462 Nm | 153 Nm |
Torque RPM | 2400 RPM | 4500 RPM |
Engine Bore Size | 99.3 mm | 82 mm |
Engine Stroke Size | 84.1 mm | 75 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1670 kg | 960 kg |
Vehicle Length | 5460 mm | 4150 mm |
Vehicle Width | 2030 mm | 1580 mm |
Vehicle Height | 1450 mm | 1290 mm |
Wheelbase Size | 3060 mm | 2340 mm |
Fuel Tank Capacity | 90 L | 70 L |