1969 Chrysler Dodge Phoenix vs. 1986 Holden Camira
To start off, 1986 Holden Camira is newer by 17 year(s). Which means there will be less support and parts availability for 1969 Chrysler Dodge Phoenix. In addition, the cost of maintenance, including insurance, on 1969 Chrysler Dodge Phoenix would be higher. At 5,211 cc (8 cylinders), 1969 Chrysler Dodge Phoenix is equipped with a bigger engine. In terms of performance, 1969 Chrysler Dodge Phoenix (228 HP @ 4400 RPM) has 145 more horse power than 1986 Holden Camira. (83 HP @ 4800 RPM). In normal driving conditions, 1969 Chrysler Dodge Phoenix should accelerate faster than 1986 Holden Camira. With that said, vehicle weight also plays an important factor in acceleration. 1969 Chrysler Dodge Phoenix weights approximately 655 kg more than 1986 Holden Camira. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1969 Chrysler Dodge Phoenix is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1969 Chrysler Dodge Phoenix. However, in wet, icy, snow, or gravel driving conditions, 1986 Holden Camira, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Chrysler Dodge Phoenix (462 Nm @ 2400 RPM) has 336 more torque (in Nm) than 1986 Holden Camira. (126 Nm @ 3600 RPM). This means 1969 Chrysler Dodge Phoenix will have an easier job in driving up hills or pulling heavy equipment than 1986 Holden Camira. 1969 Chrysler Dodge Phoenix has automatic transmission and 1986 Holden Camira has manual transmission. 1986 Holden Camira will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1969 Chrysler Dodge Phoenix will be easier to drive especially in heavy traffic.
Compare all specifications:
1969 Chrysler Dodge Phoenix | 1986 Holden Camira | |
Make | Chrysler | Holden |
Model | Dodge Phoenix | Camira |
Year Released | 1969 | 1986 |
Engine Position | Front | Front |
Engine Size | 5211 cc | 1598 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 228 HP | 83 HP |
Engine RPM | 4400 RPM | 4800 RPM |
Torque | 462 Nm | 126 Nm |
Torque RPM | 2400 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1670 kg | 1015 kg |
Vehicle Length | 5460 mm | 4350 mm |
Vehicle Width | 2030 mm | 1670 mm |
Vehicle Height | 1450 mm | 1360 mm |
Wheelbase Size | 3060 mm | 2580 mm |