1969 Chrysler Dodge Phoenix vs. 2008 Ford Fusion
To start off, 2008 Ford Fusion is newer by 39 year(s). Which means there will be less support and parts availability for 1969 Chrysler Dodge Phoenix. In addition, the cost of maintenance, including insurance, on 1969 Chrysler Dodge Phoenix would be higher. At 6,274 cc (8 cylinders), 1969 Chrysler Dodge Phoenix is equipped with a bigger engine. In terms of performance, 1969 Chrysler Dodge Phoenix (286 HP @ 4400 RPM) has 126 more horse power than 2008 Ford Fusion. (160 HP @ 6250 RPM). In normal driving conditions, 1969 Chrysler Dodge Phoenix should accelerate faster than 2008 Ford Fusion. With that said, vehicle weight also plays an important factor in acceleration. 1969 Chrysler Dodge Phoenix weights approximately 594 kg more than 2008 Ford Fusion. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1969 Chrysler Dodge Phoenix is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1969 Chrysler Dodge Phoenix. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Fusion, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Chrysler Dodge Phoenix (530 Nm @ 2800 RPM) has 318 more torque (in Nm) than 2008 Ford Fusion. (212 Nm @ 4250 RPM). This means 1969 Chrysler Dodge Phoenix will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Fusion. 1969 Chrysler Dodge Phoenix has automatic transmission and 2008 Ford Fusion has manual transmission. 2008 Ford Fusion will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1969 Chrysler Dodge Phoenix will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1969 Chrysler Dodge Phoenix | 2008 Ford Fusion | |
| Make | Chrysler | Ford |
| Model | Dodge Phoenix | Fusion |
| Year Released | 1969 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 6274 cc | 2261 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 286 HP | 160 HP |
| Engine RPM | 4400 RPM | 6250 RPM |
| Torque | 530 Nm | 212 Nm |
| Torque RPM | 2800 RPM | 4250 RPM |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1710 kg | 1116 kg |
| Vehicle Length | 5460 mm | 4840 mm |
| Vehicle Width | 2030 mm | 1840 mm |
| Vehicle Height | 1450 mm | 1460 mm |
| Wheelbase Size | 3060 mm | 2730 mm |
| Fuel Tank Capacity | 100 L | 66 L |
