1969 Chrysler Dodge Phoenix vs. 2010 Chevrolet Colorado
To start off, 2010 Chevrolet Colorado is newer by 41 year(s). Which means there will be less support and parts availability for 1969 Chrysler Dodge Phoenix. In addition, the cost of maintenance, including insurance, on 1969 Chrysler Dodge Phoenix would be higher. At 6,274 cc (8 cylinders), 1969 Chrysler Dodge Phoenix is equipped with a bigger engine. In terms of performance, 1969 Chrysler Dodge Phoenix (286 HP @ 4400 RPM) has 101 more horse power than 2010 Chevrolet Colorado. (185 HP @ 5600 RPM). In normal driving conditions, 1969 Chrysler Dodge Phoenix should accelerate faster than 2010 Chevrolet Colorado. With that said, vehicle weight also plays an important factor in acceleration. 1969 Chrysler Dodge Phoenix weights approximately 449 kg more than 2010 Chevrolet Colorado. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Chrysler Dodge Phoenix (530 Nm @ 2800 RPM) has 272 more torque (in Nm) than 2010 Chevrolet Colorado. (258 Nm @ 2800 RPM). This means 1969 Chrysler Dodge Phoenix will have an easier job in driving up hills or pulling heavy equipment than 2010 Chevrolet Colorado. 1969 Chrysler Dodge Phoenix has automatic transmission and 2010 Chevrolet Colorado has manual transmission. 2010 Chevrolet Colorado will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1969 Chrysler Dodge Phoenix will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1969 Chrysler Dodge Phoenix | 2010 Chevrolet Colorado | |
| Make | Chrysler | Chevrolet |
| Model | Dodge Phoenix | Colorado |
| Year Released | 1969 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 6274 cc | 2901 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 286 HP | 185 HP |
| Engine RPM | 4400 RPM | 5600 RPM |
| Torque | 530 Nm | 258 Nm |
| Torque RPM | 2800 RPM | 2800 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 3 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1710 kg | 1261 kg |
| Vehicle Length | 5460 mm | 4890 mm |
| Vehicle Width | 2030 mm | 1720 mm |
| Vehicle Height | 1450 mm | 1650 mm |
| Wheelbase Size | 3060 mm | 2830 mm |
| Fuel Tank Capacity | 100 L | 72 L |
